For Better Performance Please Use Chrome or Firefox Web Browser

International Journal Papers

2014

105) Jamaati R., Toroghinejad M.R., Mohtadi-Bonab M.A., Edris H., Szpunar J.A., Salmani M.R., "The effect of SiC nanoparticles on deformation texture of ARB-processed steel-based nanocomposite", Materials Characterization, 2014.

104) Jamaati R., Toroghinejad M.R., Edris H., "Comparison of Microparticles and Nanoparticles Effects on the Bonding of Roll Bonded IF Steel", Transactions Of The Indian Institute Of Metals, 2014.

103) Toroghinejad M.R., Jamaati R., Nooryan A., Edris H., "Hybrid Composites Produced By Anodizing And Accumulative Roll Bonding (ARB) Process", Ceramics International, 2014.

102)  Toroghinejad M.R., Jamaati R., Nooryan A., Edris H., "The Effect Of Alumina Content On The Mechanical Properties Of Hybrid Composites Fabricated By ARB Process", Ceramics International, 2014.

101) Samadzadeh M., Toroghinejad M.R., "The Influence of Carbon Nanotube and Roll Bonding Parameters on the Bond Strength of Al Sheets", Journal Of Materials Engineering And Performance, Vol. 23, PP. 1887-1895, 2014.

100) Jamaati R., Naseri M., Toroghinejad M.R., "Wear Behavior Of Nanostructured Al/Al2O3 Composite Fabricated Via Accumulative Roll Bonding (ARB) Process", Materials & Design, Vol. 59, PP. 540-549, 2014.

99) Karimi M., Toroghinejad M.R., "An alternative method for manufacturing high-strength CP Ti–SiC composites by accumulative roll bonding process", Materials & Design, Vol. 59, PP. 494-501, 2014.

98) Jamaati R., Toroghinejad M.R., Mohtadi-Bonab M.A., Edris H., Szpunar J.A., Salmani M.R., "Comparison Of Microparticles And Nanoparticles Effects On Deformation Texture Of Steel-Based Composite And Nanocomposite Fabricated By The ARB Process", Materials Science And Engineering A, Vol. 607, PP. 173-187, 2014.

97) Jamaati R., Toroghinejad M.R., "Effect Of Stacking Fault Energy On Mechanical Properties Of Nanostructured FCC Materials Processed By The ARB Process", Materials Science And Engineering A, Vol. 606, PP. 443-450, 2014.

96) Shiraly M., Shamanian M., Toroghinejad M.R., Ahmadi Jazani M., "Effect of Tool Rotation Rate on Microstructure and Mechanical Behavior of Friction Stir Spot-Welded Al/Cu Composite", Journal Of Materials Engineering And Performance, Vol. 23, No. 2, PP. 413-420, 2014.

95) Nikfahm A., Danaee I., Ashrafi A., Toroghinejad M.R., "Corrosion Behavior of Ultra Fine Grain Copper Produced by Accumulative Roll Bonding Process", Transactions Of The Indian Institute Of Metals, Vol. 67, No. 1, PP. 115-121, 2014.

94) Yousefi Mehr V., Toroghinejad M.R., Rezaeian A., "Mechanical Properties And Microstructure Evolutions Of Multilayered Al–Cu Composites Produced By Accumulative Roll Bonding Process And Subsequent Annealing", Materials Science And Engineering A, Vol. 601, PP. 40-47, 2014.

93) Jamaati R., Toroghinejad M.R., Edris H., Salmani M.R., "Comparison Of Microparticles And Nanoparticles Effects On The Microstructure And Mechanical Properties Of Steel-Based Composite And Nanocomposite Fabricated Via Accumulative Roll Bonding Process", Materials & Design, Vol. 56, PP. 359-367, 2014.

92) Jamaati R., Toroghinejad M.R., "Effect Of Alloy Composition, Stacking Fault Energy, Second Phase Particles, Initial Thickness, And Measurement Position On Deformation Texture Development Of Nanostructured FCC Materials Fabricated Via Accumulative Roll Bonding Process", Materials Science And Engineering A, Vol. 598, PP. 77-97, 2014.

91) Jamaati R., Toroghinejad M.R., "Effect Of Stacking Fault Energy On Deformation Texture Development Of Nanostructured Materials Produced By The ARB Process", Materials Science And Engineering A, Vol. 598, PP. 263-276, 2014.

90) Ahmadi A., Toroghinejad M.R., Najafizadeh A., "Evaluation Of Microstructure And Mechanical Properties Of Al/Al2O3/SiC Hybrid Composite Fabricated By Accumulative Roll Bonding Process", Materials & Design, Vol. 53, PP. 13-19, 2014.

89) Jamaati R., Toroghinejad M.R., Edris H., "Effect Of SiC Nanoparticles On The Mechanical Properties Of Steel-Based Nanocomposite Produced By Accumulative Roll Bonding Process", Materials & Design, Vol. 54, PP. 168-173, 2014.

88) Sayedain S., Salimi Jazi H., Toroghinejad M.R., Karimzadeh F., "Microstructure And Mechanical Properties Of Transient Liquid Phase Bonding Of Al2O3/Al Nanocomposite Using Copper Interlayer", Materials & Design, Vol. 53, PP. 275-282, 2014.

87) Yousefi Mehr V., Toroghinejad M.R., Rezaeian A., "The Effects Of Oxide Film And Annealing Treatment On The Bond Strength Of Al–Cu Strips In Cold Roll Bonding Process", Materials & Design, Vol. 53, PP. 174-181, 2014.

2013

86) Jamaati R., Toroghinejad M.R., Edris H., "Effect Of SiC Nanoparticles On Bond Strength Of Cold Roll Bonded IF Steel", Journal Of Materials Engineering And Performance, Vol. 22, PP. 3348-3356, 2013.

85) Azimi A., Ashrafizadeh F., Toroghinejad M.R., Shahriari F., "Metallurgical Characterisation Of Wrinkle Bands And Their Influence On Properties Of Galvanised Steel Sheet", Ironmaking & Steelmaking, Vol. 40, No. 8, PP. 630-634, 2013.

84) Darmiani E., Danaee I., Golozar M.A., Toroghinejad M.R., "Corrosion Investigation Of Al–SiC Nano-Composite Fabricated By Accumulative Roll Bonding (ARB) Process", Journal Of Alloys And Compounds, Vol. 552, PP. 31-39, 2013.

83) Darmiani E., Danaee I., Golozar M.A., Toroghinejad M.R., Ashrafi A., Ahmadi A., "Reciprocating Wear Resistance Of Al–SiC Nano-Composite Fabricated By Accumulative Roll Bonding Process", Materials & Design, Vol. 50, PP. 497-502, 2013.

82) Farajzadeh Dehkordi H., Toroghinejad M.R., Raeissi K., "Fabrication Of Al/Al2O3/TiC Hybrid Composite By Anodizing And Accumulative Roll Bonding Processes And Investigation Of Its Microstructure And Mechanical Properties", Materials Science And Engineering A, Vol. 585, PP. 460-467, 2013.

81) Ghaderi O., Toroghinejad M.R., Najafizadeh A., "Investigation Of Microstructure And Mechanical Properties Of Cu–SiCp Composite Produced By Continual Annealing And Roll-Bonding Process", Materials Science And Engineering A, Vol. 565, PP. 243-249, 2013.

80) Jamaati R., Toroghinejad M.R., Edris H., "Effect Of Stacking Fault Energy On Nanostructure Formation Under Accumulative Roll Bonding (ARB) Process", Materials Science And Engineering A, Vol. 578, PP. 191-196, 2013.

79) Jamaati R., Toroghinejad M.R., Edris H., "Fabrication Of Nanoparticle Strengthened IF Steel Via ARB Process", Materials Science And Engineering A, Vol. 583, PP. 20-24, 2013.

78) Salimyanfard F., Toroghinejad M.R., Ashrafizadeh F., Hoseini M., Szpunar J.A., "Investigation Of Texture And Mechanical Properties Of Copper Processed By New Route Of Equal Channel Angular Pressing", Materials & Design, Vol. 44, PP. 374-381, 2013.

77) Toroghinejad M.R., Ashrafizadeh F., Jamaati  R., "On The Use Of Accumulative Roll Bonding Process To Develop Nanostructured Aluminum Alloy 5083", Materials Science And Engineering A, Vol. 561, PP. 145-151, 2013.

76) Toroghinejad M.R., Jamaati  R., Hoseini M., Szpunar J.A., Dutkiewicz J., "Texture Evolution Of Nanostructured Aluminum/Copper Composite Produced By The Accumulative Roll Bonding And Folding Process", Metallurgical And Materials Transactions A, Vol. 44, No. 3, PP. 1587-1598, 2013.

75) Toroghinejad M.R., Jamaati  R., Dutkiewicz J., Szpunar J.A., "Investigation Of Nanostructured Aluminum/Copper Composite Produced By Accumulative Roll Bonding And Folding Process", Materials & Design, Vol. 51,  PP.. 274-279, 2013.

74) Zabihi M., Toroghinejad M.R., Shafyei A., "Application Of Powder Metallurgy And Hot Rolling Processes For Manufacturing Aluminum/Alumina Composite Strips", Materials Science And Engineering A, Vol. 560, PP. 567-574, 2013.

2012

73) Azimi A., Ashrafizadeh F., Toroghinejad M.R., Shahriari F., "Metallurgical Analysis Of Pimples And Their Influence On The Properties Of Hot Dip Galvanized Steel Sheet", Engineering Failure Analysis, Vol. 26, PP. 81-88, 2012.

72) Azimi A., Ashrafizadeh F., Toroghinejad M.R., Shahriari F., "Metallurgical Assessment Of Critical Defects In Continuous Hot Dip Galvanized Steel Sheets", Surface & Coatings Technology, Vol. 206, No. 21, PP. 4376-4383, 2012.

71) Azimi A., Shahriari F., Ashrafizadeh F., Toroghinejad M.R., Jamshidi J., "The Influence Of Major Defects On The Properties Of Continuous Galvanized Steel Sheet", Advanced Materials Research , Vol. 445, PP. 661-666, 2012.

70) Hashemi M., Jamaati R., Toroghinejad M.R., "Microstructure And Mechanical Properties Of Al/SiO2 Composite Produced By CAR Process", Materials Science And Engineering A, Vol. 532, PP. 275-281, 2012.

69) Jamaati R., Amirkhanlou S., Toroghinejad M.R., Niroumand B., "Comparison Of The Microstructure And Mechanical Properties Of As-Cast A356/SiC MMC Processed By ARB And CAR Methods", Journal Of Materials Engineering And Performance, Vol. 21, No. 7, PP. 1249-1253, 2012.

68) Jamaati R., Toroghinejad M.R., "Fabrication Of MMC Strip By CRB Process", Journal Of Materials Engineering And Performance, Vol. 21, No. 6, PP. 859-864, 2012.

67) Jamaati R., Toroghinejad M.R., Dutkiewicz J., Szpunar J.A., "Investigation Of Nanostructured Al/Al2O3 Composite Produced By Accumulative Roll Bonding Process", Materials & Design, Vol. 35, No. 1, PP. 37-42, 2012.

66) Jamaati  R., Toroghinejad M.R., Hoseini M., Szpunar J.A., "Development Of Texture During ARB In Metal Matrix Composite", Journal Of Materials Science & Technology, Vol. 28, No. 4, PP. 406-410, 2012.

65) Razavi G., Ansaripour A., Monajatizadeh H., Toroghinejad M.R., "An Investigation On Full Annealing Temperature And Annealing Twins Density In Fe-33Mn-3Si-2Al High Manganese Steel", Journal Of Advanced Materials And Processing , Vol. 1, No. 1, PP. 3-8, 2012.

64) Shabani A., Toroghinejad M.R., Shafyei A., "Effect Of Post-Rolling Annealing Treatment And Thickness Of Nickel Coating On The Bond Strength Of Al–Cu Strips In Cold Roll Bonding Process", Materials & Design, Vol. 40, PP. 212-220, 2012.

63) Shabani A., Toroghinejad M.R., Shafyei A., "Fabrication Of Al/Ni/Cu Composite By Accumulative Roll Bonding And Electroplating Processes And Investigation Of Its Microstructure And Mechanical Properties", Materials Science And Engineering A, Vol. 558, PP. 386-393, 2012.

62) Soltani M.A., Jamaati R., Toroghinejad M.R., "The Influence Of TiO2 Nano-Particles On Bond Strength Of Cold Roll Bonded Aluminum Strips", Materials Science And Engineering A, Vol. 550, PP. 367-374, 2012.

61) Toroghinejad M.R., Ashrafizadeh F., Jamaati R., Hoseini M., Szpunar J.A., "Textural Evolution Of Nanostructured Aa5083 Produced By ARB", Materials Science And Engineering A, Vol. 556, PP. 351-357, 2012.

60) Vafaei R., Toroghinejad M.R., Pippan R., "Evaluation Of Mechanical Behavior Of Nano-Grained 2024 Al Alloy During High Pressure Torsion (HPT) Process At Various Temperatures", Materials Science And Engineering A, Vol. 536, PP. 73-81, 2012.

59) Esfahani H., Dabir F., Taheri M., Sohrabi N., Toroghinejad M.R., "Sol–Gel Derived Hydroxyapatite Coating On TiB2/TiB/Ti Substrate", Surface Engineering, Vol. 28, No. 7, PP. 526-531, 2012.

58) Botlani Esfahani M., Toroghinejad M.R., "Application Of A Bayesian Artificial Neural Network And The Reversible Jump Markov Chain Monte Carlo Method To Predict The Grain Size Of Hot Strip Low Carbon Steels", Journal Of The Serbian Chemical Society, Vol. 77, No. 7, PP. 937-944, 2012.

57) Khademzadeh S., Toroghinejad M.R., Ashrafizadeh F., "Structural Evolution And Interdiffusion In Al/Cu Nanocomposites Produced By A Novel Manufacturing Process", Metals And Materials International, Vol. 18, No. 6, PP. 1049-1054, 2012.

2011

56) Amirkhanlou S., Jamaati R., Niroumand B., Toroghinejad M.R., "Fabrication And Characterization Of Al/SiCp Composites By CAR Process", Materials Science And Engineering A, Vol. 528, PP. 4462-4467, 2011.

55) Amirkhanlou S., Jamaati R., Niroumand B., Toroghinejad M.R., "Manufacturing Of High-Performance Al356/SiCp Composite By CAR Process", Materials And Manufacturing Processes, Vol. 26, PP. 902-907, 2011.

54) Amirkhanlou S., Jamaati  R., Niroumand B., Toroghinejad M.R., "Using ARB Process As A Solution For Dilemma Of Si And SiCp Distribution In Cast Al-Si/SiCp Composites", Journal Of Materials Processing Technology, Vol. 211, PP. 1159-1165, 2011.

53) Amirkhanlou S., Rezaei M., Niroumand B., Toroghinejad M.R., "High-Strength And Highly-Uniform Composites Produced By Compocasting And Cold Rolling Processes", Materials & Design, Vol. 32, No. 4, PP. 2085-2090, 2011.

52) Amirkhanlou S., Rezaei M., Niroumand B., Toroghinejad M.R., "Refinement Of Microstructure And Improvement Of Mechanical Properties Of Al/Al2O3 Composite By Accumulative Roll Bonding Process", Materials Science And Engineering A, Vol. 528, No. 6, PP. 2548-2553, 2011.

51) Jamaati R., Amirkhanlou S., Toroghinejad M.R., Niroumand B., "CAR Process: A Technique For Significant Enhancement Of As-Cast MMC Properties", Materials Characterization, Vol. 62, PP. 1228-1234, 2011.

50) Jamaati R., Toroghinejad M.R., "Cold Roll Bonding Bond Strengths: Review", Materials Science And Technology, Vol. 27, No. 7, PP. 1101-1108, 2011.

49) Jamaati R., Toroghinejad M.R., "Microstructure And Mechanical Properties Of Al/Al2O3 MMC Produced By Anodising And Cold Roll Bonding", Materials Science And Technology, Vol. 27, No. 11, PP. 1648-1652, 2011.

48) Jamaati R., Toroghinejad M.R., Szpunar J.A., Li D., "Tribocorrosion Behavior Of Aluminum/Alumina Composite Manufactured By Anodizing And ARB Processes", Journal Of Materials Engineering And Performance, Vol. 20, No. 9, PP. 1600-1605, 2011.

47) Jamaati  R., Toroghinejad M.R., Szpunar J.A., Li D., "Tribocorrosion Behaviour Of Al/Al2O3 MMC Produced By ARB Process", Tribology - Materials, Surfaces & Interfaces, Vol. 1, No. 1, PP. 10-15, 2011.

46) Jamaati R., Toroghinejad M.R., Hoseini M., Szpunar J.A., "Texture Development In Al/Al2O3 MMCs Produced By Anodizing And ARB Processes", Materials Science And Engineering A, Vol. 528, No. 10-11, PP. 3573-3580, 2011.

45) Jamaati R., Amirkhanlou S., Toroghinejad M.R., Niroumand B., "Effect Of Particle Size On Microstructure And Mechanical Properties Of Composites Produced By ARB Process", Materials Science And Engineering A, PP. 2143-2148, 2011.

44) Jamaati R., Amirkhanlou S., Toroghinejad M.R., Niroumand B., "Significant Improvement Of Semi-Solid Microstructure And Mechanical Properties Of A356 Alloy By ARB Process", Materials Science And Engineering A, Vol. 528, No. 6, PP. 2495-2501, 2011.

43) Jamaati R., Toroghinejad M.R., "The Role Of Surface Preparation Parameters On Cold Roll Bonding Of Aluminum Strips", Journal Of Materials Engineering And Performance, Vol. 20, No. 2, PP. 191-197, 2011.

42) Raei M., Toroghinejad M.R., Jamaati R., "Nano/Ultrafine Structured Aa1100 By ARB Process", Materials And Manufacturing Processes, Vol. 26, No. 11, PP. 1352-1356, 2011.

41) Rezaei M.R., Toroghinejad M.R., Ashrafizadeh F., "Effects Of ARB And Ageing Processes On Mechanical Properties And Microstructure Of 6061 Aluminum Alloy", Journal Of Materials Processing Technology, Vol. 211, No. 6, PP. 1184-1190, 2011.

40) Rezaei M.R., Toroghinejad M.R., Ashrafizadeh F., "Production Of Nano-Grained Structure In 6061 Aluminum Alloy Strip By Accumulative Roll Bonding", Materials Science And Engineering A, Vol. 529, No. 1, PP. 442-446, 2011.

39) Salimyanfard F., Toroghinejad M.R., Ashrafizadeh F., Jafari M., "EBSD Analysis Of Nano-Structured Copper Processed By ECAP", Materials Science And Engineering A, Vol. 528, No. 16-17, PP. 5348-5355, 2011.

2010

38) Abbasi M., Toroghinejad M.R., "Effects Of Processing Parameters On The Bond Strength Of Cu/Cu Roll-Bonded Strips", Journal Of Materials Processing Technology, Vol. 210, No. 3, PP. 560-563, 2010.

37) Hoseini M., Meratian M., Toroghinejad M.R., Szpunar J.A., "The Role Of Grain Orientation In Microstructure Evolution Of Pure Aluminum Processed By Equal Channel Angular Pressing", Materials Characterization, Vol. 61, No. 12, PP. 1371-1378, 2010.

36) Jamaati R., Toroghinejad M.R., "Application Of ARB Process For Manufacturing High-Strength, Finely Dispersed And Highly Uniform Cu/Al2O3 Composite", Materials Science And Engineering A, Vol. 527, No. 27-28, PP. 7430-7435, 2010.

35) Jamaati R., Toroghinejad M.R., "Effect Of Al2O3 Nano-Particles On The Bond Strength In CRB Process", Materials Science And Engineering A, Vol. 527, No. 18-19, PP. 4858-4863, 2010.

34) Jamaati R., Toroghinejad M.R., "Effect Of Friction, Annealing Conditions And Hardness On The Bond Strength Of Al/Al Strips Produced By Cold Roll Bonding Process", Materials & Design, Vol. 31, No. 9, PP. 4508-4513, 2010.

33) Jamaati R., Toroghinejad M.R., "High-Strength And Highly-Uniform Composite Produced By Anodizing And Accumulative Roll Bonding Processes", Materials & Design, Vol. 31, No. 10, PP. 4816-4822, 2010.

32) Jamaati R., Toroghinejad M.R., "Investigation Of The Parameters Of The Cold Roll Bonding (CRB) Process", Materials Science And Engineering A, Vol. 527, No. 9, PP. 2320-2326, 2010.

31) Jamaati R., Toroghinejad M.R., "Manufacturing Of High-Strength Aluminum/Alumina Composite By Accumulative Roll Bonding", Materials Science And Engineering A, Vol. 527, No. 16-17, PP. 4146-4151, 2010.

30) Jamaati R., Toroghinejad M.R., Najafizadeh A., "An Alternative Method Of Processing MMCs By CAR Process", Materials Science And Engineering A, Vol. 527, No. 10-11, PP. 2720-2724, 2010.

29) Jamaati R., Toroghinejad M.R., Najafizadeh A., "Application Of Anodizing And CAR Processes For Manufacturing Al/Al2O3 Composite", Materials Science And Engineering A, Vol. 527, No. 16-17, PP. 3857-3863, 2010.

28) Pasebani S., Toroghinejad M.R., "Nano-Grained 70/30 Brass Strip Produced By Accumulative Roll-Bonding (ARB) Process", Materials Science And Engineering A, Vol. 257, No. 3, PP. 491-497, 2010.

27) Pasebani S., Toroghinejad M.R., Hoseini M., Szpunar J.A., "Textural Evolution Of Nano-Grained 70/30 Brass Produced By Accumulative Roll-Bonding", Materials Science And Engineering A, Vol. 527, No. 8, PP. 2050-2056, 2010.

26) Raei M., Toroghinejad M.R., Jamaati R., Szpunar J.A., "Effect Of ARB Process On Textural Evolution Of Aa1100 Aluminum Alloy", Materials Science And Engineering A, Vol. 527, No. 26, PP. 7068-7073, 2010.

25) Salimyanfard F., Toroghinejad M.R., Ashrafizadeh F., Hoseini M., Szpunar J.A., "Textural Evaluation Of Copper Produced By Equal Channel Angular Pressing With Routes A And B30", Materials Science And Engineering A, Vol. 527, No. 23, PP. 6260-6269, 2010.

2009

24) Asgari H., Ashrafizadeh F., Toroghinejad M.R., "Influence Of Steel Substrate Grain Size On Phase Layers Growth Kinetics And Thickness Of Zinc Hot-Dipped Steel Sheets", Ironmaking & Steelmaking, Vol. 36, No. 2, PP. 145-149, 2009.

23) Asgari H., Toroghinejad M.R., Golozar M.A., "Effect Of Coating Thickness On Modifying The Texture And Corrosion Performance Of Hot-Dip Galvanized Coating", Current Applied Physics, Vol. 9, No. 1, PP. 59-66, 2009.

22) Azadeh M., Toroghinejad M.R., "Effect Of Heat Treatment On Formability Of Hot-Dip Galvanized Low Carbon Steel Sheet", ISIJ International, Vol. 49, No. 12, PP. 1945-1951, 2009.

21) Botlani Esfahani M., Toroghinejad M.R., Abbasi S., "Artificial Neural Network Modeling The Tensile Strength Of Hot Strip Mill Products", ISIJ International, Vol. 49, No. 10, PP. 1583-1587, 2009.

20) Botlani Esfahani M., Toroghinejad M.R., Key Yeganeh A., "Modeling The Yield Strength Of Hot Strip Low Carbon Steels By Artificial Neural Network", Materials & Design, Vol. 30, PP. 3653-3658, 2009.

19) Shaarbaf M., Toroghinejad M.R., "Evaluation Of Texture And Grain Size Of Nanograined Copper Produced By The Accumulative Roll Bonding Process", Metallurgical And Materials Transactions A, Vol. 40, PP. 1693-1700, 2009.

2008

18) Asgari H., Bakhtiari A., Toroghinejad M.R., Ashrafizadeh F., "Influence Of Force Variations In Skin Pass Rolling On Texture And Surface Reactivity Of Hot-Dip Galvanized Low Carbon Steel Sheets", Ironmaking & Steelmaking, Vol. 35, No. 7, PP. 545-548, 2008.

17) Asgari H., Toroghinejad M.R., Golozar M.A., "Relationship Between (00.2) And (20.1) Texture Components And Corrosion Resistance Of Hot-Dip Galvanized Zinc Coatings", Journal Of Materials Processing Technology, Vol. 198, No. 3-1, PP. 54-59, 2008.

16) Asgari H., Toroghinejad M.R., Golozar M.A., "The Role Of Texture And Microstructure In Optimizing The Corrosion Behaviour Of Zinc Hot-Dip Coated Steel Sheets", ISIJ International, Vol. 5, No. 48, PP. 628-633, 2008.

15) Hoseini M., Meratian M., Toroghinejad M.R., Szpunar J.A., "Texture Contribution In Grain Refinement Effectiveness Of Different Routes During ECAP", Materials Science And Engineering A, Vol. 497, PP. 87-92, 2008.

14) Raeissi K., Toroghinejad M.R., "EIS Evaluation Of Chromate And Organic Coating Layers On Corrosion Performance Of Galvanized Steel Sheets", ISIJ International, Vol. 48, No. 1, PP. 83-88, 2008.

13) Raeissi K., Toroghinejad M.R., "The Effect Of Chromated And Organic Layers On Corrosion Resistance Of Galvanized Steel Sheets", Progress In Organic Coatings, Vol. 62, PP. 61-64, 2008.

12) Shaarbaf M., Toroghinejad M.R., "Nano-Grained Copper Strip Produced By Accumulative Roll Bonding Process", Materials Science And Engineering A, Vol. 473, No. 1-2, PP. 28-33, 2008.

2007

11) Asgari H., Toroghinejad M.R., Golozar M.A., "On Texture, Corrosion Resistance And Morphology Of Hot-Dip Galvanized Zinc Coatings", Applied Surface Science, Vol. 253, No. 16, PP. 6769-6777, 2007.

10) Safaeirad M., Toroghinejad M.R., Ashrafizadeh F., "Effect Of Microstructure And Texture On Formability And Mechanical Properties Of Hot-Dip Galvanized Steel Sheets", Journal Of Materials Processing Technology, Vol. 196, No. 3-1, PP. 205-212, 2007.

9) Toroghinejad M.R., Ashrafizadeh F., "Effect Of Coating Thickness On Formability Of Hot-Dip Galvanized Low Carbon Steel Sheet", ISIJ International, Vol. 47, No. 10, PP. 1510-1517, 2007.

2006

8) Toroghinejad M.R., Dini G., "Effect Of Ti-Microalloy Addition On The Formability And Mechanical Properties Of A Low Carbon (ST14) Steel", International Journal Of Iron And Steel Society Of Iran, Vol. 3, No. 2, PP. 1-6, 2006.

2003

7) Toroghinejad M.R., Humphreys A.O., Ashrafizadeh F., Najafizadeh A., Jonas J.J., "Effect of Rolling Temperature on the Recrystallization Texture of Warm Rolled Steels", Materials Science Forum, Vol. 426-432, PP. 3691-3696.

6) Humphreys A.O., Liu D., Toroghinejad M.R., Essadiqi E., Jonas J.J., "Warm Rolling Behavior Of Low Carbon Steels", Materials Science And Technology, Vol. 19, No. 6, PP. 709-714, 2003.

5) Toroghinejad M.R., Humphreys A.O., Essadiqi E., Ashrafizadeh F., Najafizadeh A., Jonas J.J., "Effect Of Chromium, Boron And Manganese Additions On The Deformation And Recrystallization Textures Of Warm Rolled Low Carbon Steels", ISIJ International, Vol. 43, No. 11, PP. 1842-1850, 2003.

4) Toroghinejad M.R., Humphreys A.O., Liu D., Ashrafizadeh F., Najafizadeh A., Jonas J.J., "Effect Of Rolling Temperature On The Deformation And Recrystallization Textures Of Warm-Rolled Steels", Metallurgical And Materials Transactions A, Vol. 34, No. 5, PP. 1163-1174, 2003.

2002

3) Humphreys A.O., Liu D., Toroghinejad M.R., Jonas J.J., "Effect Of Chromium And Boron Addition On The Warm Rolling Behavior Of Low Carbon Steels", ISIJ International, Vol. 42, PP. S52-S56, 2002.

2) Liu D., Humphreys A.O., Toroghinejad M.R., Jonas J.J., "The Deformation Microstructure And Recrystallization Behavior Of Warm Rolled Steels", ISIJ International, Vol. 42, No. 7, PP. 751-759, 2002.

1997

1) Toroghinejad M.R., Salehi M., Ashrafizadeh F., "The Effect Of Precarburizing Treatment On Morphology Of The Boride Layers", Materials And Manufacturing Processes, Vol. 12, No. 1, PP. 117-123, 1997.